Specialty Products
- POLYURETHANE COVERED HOSE
- SPECIALLY REINFORCED & VARIABLLY REINFORCED SUBMARINE HOSE
- REELING HOSE
- SHIP-TO-SHIP HOSE
POLYURETHANE COVERED HOSE
Applicable for busy terminals coping with marine hoses that quickly deteriorate and become worn. YOKOHAMA Polyurethane covered hose gives you superior abrasion resistance in severe conditions.
It comes with vivid orange color which gives you better visibility.
Polyurethane covers are applicable to all floating hose products.
It comes with vivid orange color which gives you better visibility.
Polyurethane covers are applicable to all floating hose products.
CHARACTERISTICS COMPARISON
| RUBBER | POLYURETHANE | |
|---|---|---|
| Strength | Very Good 200 kgf/cm2 |
Excellent 400 kgf/cm2 |
| Hardness | Very Good 55 degrees |
Excellent 90 degrees |
| Visibility | Clear Orange colored stripes |
Very clear Full bright orange color |
| Scraping off Marine Growth |
Good | Very Good |
SPECIALLY REINFORCED & VARIABLY
REINFORCED SUBMARINE HOSE
SRSH (Specially reinforced Submarine Hose) and VRSH (Variably Reinforced Submarine Hose) with bending stiffness 500kN-m2 (51ton-m2) designed for SALM (Single Anchor Leg Mooring) System were developed and employed for FOSCO Japan in 1983 originally. this outstanding characteristic contributed to the successful operation of SALM System since then. For more details, please contact YOKOHAMA.
REELING HOSE
Developed for FPSO/FSO reel system.
The hose is specially designed to withstand the crushing and bending force due to the reeling. For more details, please contact YOKOHAMA.
The hose is specially designed to withstand the crushing and bending force due to the reeling. For more details, please contact YOKOHAMA.
STS (SHIP-TO-SHIP) HOSE
The name of YOKOHAMA is well known as the manufacturer of support products such as YOKOHAMA FENDER and SEAFLEX STS HOSE for offshore Ship to Ship (STS) transfer operation. SEAFLEX STS hose is designed for safe offshore operation, and has outstanding characteristics as follows,
Applicable Standard : EN1765
- Heavy duty design - Safety factor of pressure strength is more than five times of the operating pressure.
- No permanent deformation - Helix wire free construction - deformation shall not remain permanently even though hoses get kinked by rough bending and deformation by slight vacuum during operation.
| Diameter | Length |
|---|---|
| 6" | 6m (19.7ft) |
| 8" | 6m (19.7ft) |
| 8m (26.2ft) | |
| 10m (32.8ft) | |
| 12m (39.4ft) | |
| 10" | 8m (26.2ft) |
| 10m (32.8ft) | |
| 12m (39.4ft) | |
| 12" | 7.6m (25ft) |
| 9.1m (30ft) | |
| 9.7m (32ft) | |
| 12m (39.4ft) |
